Midco RS40 Manuale Utente Scaricare il pdf

The ECONOMITE Model RS40

direct spark ignition conversion burner is adaptable to any type gas utilization equipment,

including gravity and forced circulation furnaces and boilers, and is particularly recommended for horizontal and downdraft

gas utilization equipment since it needs no draft to maintain a pilot. Power burner design makes it perfectly suited for oil

burner replacement.

In the United States, installation must conform with local

codes or, in the absence of local codes, with Installation of

Domestic Gas Conversion Burners, ANSI Z21.8a-latest

edition and National Fuel Gas Code, ANSI Z223.1-latest

edition(s) available from American National Standard

Institute. Further reference should be made to the

recommendation of your fuel supplier.

Note: Any additions, changes or conversions required in order

for the gas utilization equipment to satisfactorily meet the

application needs must be made by a MIDCO distributor (or

other qualified agency) using factory specified and approved

parts.

In Canada, installation must conform with local codes or, in the

absence of local codes, with Installation Codes for Gas

Burning Appliances and Equipment, CGA Standard

CAN/CGA 1-B149.1 or 2. When the conversion burner is

used on Forced Air Central Furnace, the two yellow and

black warning labels in the literature envelope shall be

attached in accordance with Installation Code, CGA

Standard CAN/CGA 1-B149, Clause 5.4.4.4. Further

reference should be made to the recommendation of your fuel

supplier.

INSTALLER: Inform and demonstrate to the user

the correct operation and maintenance of this gas

utilization equipment. Inform the user of the

hazards of storing flammable liquids and vapors in

the vicinity of this gas utilization equipment and

remove such hazards. Affix this manual adjacent

to the conversion burner.

CODE COMPLIANCE IS THE SOLE RESPONSIBILITY

OF THE INSTALLER.

WARNING: If the information in

these instructions is not followed

exactly, a fire or explosion may

result, causing property damage,

personal injury or death.

Do not store or use gasoline or other

flammable vapors and liquids in the

vicinity of this or any other

appliance.

Installation and service must be

performed by a qualified installer,

service agency or the gas supplier.

WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electrical

switch; do not use any phone in

your building.

• Immediately call your gas

supplier from a neighbor's

phone. Follow the gas suppliers'

instructions.

• If you cannot reach your gas

supplier, call the fire department.

USER: Retain this manual for future reference. If other than routine service or maintenance

as described in this manual is required, contact a qualified service agency. DO NOT

ATTEMPT REPAIRS. An inadvertent service error could result in a dangerous condition.

: The following terms are used to identify hazards, safety precautions or special

notations and have standard meanings throughout this manual. When you see the safety alert symbol and one of the

safety information terms as shown below, be aware of the hazard potential.

DANGER: Identifies the most serious hazards which will result in severe personal injury or death.

WARNING: Signifies a hazard that could result in personal injury or death.

CAUTION:

Identifies unsafe practices which would result in minor personal injury or product and property damage.

Installation and Service Instructions

Midco

International Inc

4140 West Victoria Street Chicago, Illinois 60646

tel 773.604.8700 fax 773.604.4070 web www.midco-intl.com

602

8471 09

Printed in U.S.A.

Economite RS40

Conversion Burners

1 2 3 4 5 6 ... 11 12

Sommario

Pagina 1 - Economite RS40

The ECONOMITE Model RS40direct spark ignition conversion burner is adaptable to any type gas utilization equipment,including gravity and forced circul

Pagina 2 - Part 1 Installation

Keep the area around the burner clear and free of combustible materials, gasoline and otherflammable liquids or vapors. Do not obstruct burner air inl

Pagina 3

I. Motor Will Not Run or Motor Runsin Repeated Cycles.II. Motor Runs Continuously,But No Flame.Trouble ChartMake sure the thermostat and operating con

Pagina 4

Midco International Inc.4140 West Victoria Street * Chicago, Illinois 60646tel 773.604.8700 * fax 773.604.4070 * web www.midco-intl.com

Pagina 5

Part 1 InstallationSpecificationsI VentilationII Preparation of the GasUtilization EquipmentNATURAL or PROPANE GasAir Delivery (Approximate air delive

Pagina 6

A combustion chamber liner is normally requiredto protect non-heat transfer surfaces and toprovide a radiant bed for rapid heat transfer tothe primary

Pagina 7

and weight of the material employed to maintain clearance and prevent physical damageand separation of joints.?? A draft hood or barometric draft regu

Pagina 8 - Part 2 Service

?? Set the thermostat heat anticipator for the total current draw handled by thethermostat. The current draw of the ECONOMITE 24V operating circuit i

Pagina 9

?? As shipped, the installedNATURAL gas spud has a .266"diameter orifice size for an inputcapacity range of approximately150 to 200 MBH. Spare sp

Pagina 10 - Consumer Instructions

VIII Initial Start-up/Adjustment Continued7. Turn operating control to ON or set thermostat above room temperature. Main flameshould come on after a 3

Pagina 11 - Trouble Chart

DANGER: Be sure that the Main Manual Shut-Off Valve, Combination Valve andBurner Power Switch are turned off before removing any parts for service.WAR

Pagina 12

XII Electronic Control?? If the pressure regulator fails to maintain a constant manifold gas pressure within ±0.1"W.C., and it is confirmed that

Commenti su questo manuale

Nessun commento

Midco RS40 Manuale Utente

Navigare online o scaricare Manuale Utente per Apparecchiature Midco RS40. Midco RS40 User Manual Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Apparecchiature Midco RS40